nexrobotics |
Introduction
200RPM Centre Shaft Economy Series DC Motor is high quality low cost DC geared motor. It has steel gears and pinions to ensure longer life and better wear and tear properties. The gears are fixed on hardened steel spindles polished to a mirror finish. The output shaft rotates in a plastic bushing. The whole assembly is covered with a plastic ring. Gearbox is sealed and lubricated with lithium grease and require no maintenance. The motor is screwed to the gear box from inside.
Although motor gives 200 RPM at 12V but motor runs smoothly from 4V to 12V and gives wide range of RPM, and torque. Tables below gives fairly good idea of the motor’s performance in terms of RPM and no load current as a function of voltage and stall torque, stall current as a function of voltage.
For compatible wheels refer to Wheels and Accessories product category.
You can also mount this motor on the chassis using Motor Mount for Centre Shaft Economy Series DC Motor
For adding Position Encoder, refer to Encoder Kit for Centre Shaft Economy Series DC Motor
Specifications
Inside view of Centre Shaft Economy Series DC Motor
Motor Mounting Clamp and Position Encoder Kit for Centre Shaft Economy Series DC Motor
|
Motor performance in terms of RPM and no load current as a function of input voltage |
Motor performance in terms of stall torque and stall current as a function of input voltage |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Note: Motors’s data can vary by ±10%
Visit forum for Online Discussion on this product