Facing problems in adding effects to any audio signal?Wanted to re-mix a song but has no idea.Don't worry our product at your service.It plays back any audio signal adding whatever effects you choose.
#4-615
Written a program to implement using ECHO effect,but noise increased.Working to get better
#03-06-2015
Too much of noise though.
#1-06-2015
This can help : http://www.vttoth.com/CMS/technical-notes/68-mixing-digital-audio
#29-05-2015
Took the audio input through 3.5 mm jack and changed the brightness of LEDS according to tune.
Successful in converting sound signal into digital!
Learnt about Serial Peripheral Interface(SPI),how to create RAM on fpga.Tried to take input from microphone into FPGA,but faced problems in amplifying.
# 27-05-2015
Read all the tutorials on EMBEDDED MICRO.. But many questions are still to be answered!
learnt about metastability,debouncing and ways to prevent them,but failed to implement them on mojo through verilog code.
#26-05-2014
Visualised PWM concept on MOJO board through brightness of LED using analog input pins,potentiometer,AVR on-board microcontroller.AVR microcontroller helps in sampling given analog signal and converts it ...
#26-05-2015
Turned on LED when last bit of converted Digital signal is 0 and turn off for 1. Successfully done (y).
Trying for varying brightness of LED from potentiometer output.
#26-05-2015
there are 8 on-board led's and a reset button on mojo board.relating these 8 LED's as 8 consecutive bits(1 byte ),our aim is to add ...
# 23-05-2015
Read the theory about converting audio to digital and filtering it. Document can be found under files section. I think I can turn on that old XILINX boards
Unfortunately haven' completed today,tried a lot but many errors.
in the process of learning verilog.
# 22-05-2015
Blinked a led on MOJO board and learned to merge two different modules. @Video can be seen under Files.
# 21-05-2015
Using reset button on MOJO board turning on LED's. Also learning about basics of VERILOG.